Page 16 - OWL Intuition Manuals

• • • •
conductors must be sleeved.
Run the new 3 core mains cable from the Tank Sensor backplate to the Wiring Centre, fixing as required.
Run the Temperature Sensor cable from the hot water tank back to the Tank Sensor backplate, fixing as required.
For an overview see the ‘before’ & ‘after’ schematics below. These diagrams are schematic and should be used for guidance only.
Refer to the separate wiring diagram and table below for the wiring arrangement appropriate for your heating system. Make the connections as appropriate.
OWL Intuition-h Hot Water Control Tank Sensor Backplate Wiring
Terminal
Description
N
Neutral - Not used, may be used to ‘park’ unused neutral wire.
L
Live - Not used, may be used to ‘park’ unused live wire.
1
Common terminal of Tank Sensor latching relay
2
Not used
3
‘Heat Satisfied’ - Normally closed terminal of Tank Sensor latching relay
4
‘Call for Hot Water’ - Normally open terminal of Tank Sensor latching relay
Earth continuity connection
16
© 2 Save Energy Limited 2014