Page 14 - OWL Intuition Manuals

6. Make pocket for hot water Temperature Sensor -
Using a 6mm diameter screwdriver carefully make a pocket down the side of the hot water tank / cylinder. Ensure that there will be a good tight thermal contact between the tank and the Temperature Sensor.
7. Insert hot water Temperature Sensor - Carefully push the Temperature Sensor down into the pocket until the stainless steel tube is just out of sight. It is very important that the Temperature Sensor makes good thermal contact with the side of the tank / cylinder.
8. Refit original thermostat - Taking care not to damage the Temperature Sensor cable, refit the original thermo- stat and the spring retaining cable. (Photo shows optional daisy-chain expansion connector)
14
© 2 Save Energy Limited 2014