Page 18 - OWL Intuition Manuals
P. 18
Additional Information
Safety Switch
The Room Sensor is fitted with a safety switch that is automatically activated when the front of the Room Sensor is removed from the backplate. Safety switch activation will im- mediately turn the heating off and the web dashboard will show an appropriate warning message. The Room Sensor MUST be installed onto the special backplate supplied other- wise the safety switch will not operate and the Room Sensor will not work.
Room Sensor - Delete Network OWL Pairing
You can delete the Room Sensor to Network OWL pairing by pressing both the Standby and Away buttons together for a minimum of 10 seconds (count to 15). The 3 LEDs will start flashing indicating that it is in pairing mode.
Room Sensor - Delete Relay Unit Pairing
You can delete the Room Sensor to Relay Unit pairing by pressing all 3 buttons together for a minimum of 3 seconds (count to 5). The 3 LEDs will start scrolling indicating that it is in Relay Unit pairing mode (for up to 2 minutes). Refer to Relay Unit Installation Instruc- tions for further information.
18 © 2 Save Energy Limited 2014
