Page 9 - OWL Intuition Manuals

and click “Next”.
• Adjust consumption Voltage and Power Factor settings to measured values if available.
If in doubt leave the default values (Voltage = 230; Power Factor = 1.0) and click
“Next”.
• Configure the Solar Settings (Generation) settings to measured values / current meter
readings if available. If in doubt leave the default values (Voltage = 240; Power Factor
= 1.0).
• Enter the PV System Rating (kW) and select the direction that the majority of the solar
panels are facing then click “Next”.
• Ensure message “Device successfully added to your Intuition system.” is displayed.
• Click the “Finish” button.
• Unless you have further Intuition devices to install / configure then click the “Finish”
button.
• Click the “OK” button to close the Wizard. The web dashboard will then automatically
refresh itself and you should now have an Electricity and Solar widget within the web dashboard, although the live readings will be zero at this stage until the Sensors are correctly attached in the next step.
© 2 Save Energy Limited 2014 9