Page 11 - OWL Intuition Manuals

Intuition-pv Type 2 (solar PV - Consumer unit)
• PV Generation Sensor 1 - Locate the PV generated power cable between the inverter and consumer unit (fuse box). Using the latch, clamp the first Sensor around the in- sulated Live cable going into the consumer unit. Plug this Sensor into the Transmitter centre socket. The orientation of this Sensor is not important.
• PV Generation Sensor 2 - For correct operation it is important that the CE mark on this Sensor is oriented to face the Inverter end of the cable. Taking this into account, using the latch, clamp this second Sensor around the same insulated Live cable that PV Generation Sensor 1 is attached to. Plug this Sensor into either of the arms of the Y-Cable.
• Grid Sensor - Locate the supply cables between your electricity meter and consumer unit (fuse box). For correct operation it is important that the CE mark on this Sensor is oriented to face the electricity meter end of the cable. Taking this into account, using the latch, clamp this third Sensor around the insulated Live cable going into the consumer unit. Plug this Sensor into the remaining arm of the Y-Cable.
• Y-Cable - With both Sensors attached, plug the Y-Cable into the Transmitter left-hand socket.
Tip: Orient the Sensor clamps such that the CE mark faces the direction the power is coming from.
© 2 Save Energy Limited 2014 11