Page 19 - OWL Intuition Manuals

Additional Information
Safety Switch
The Tank Sensor is fitted with a safety switch that is automatically activated when the front of the Tank Sensor is removed from the backplate. Safety switch activation will immedi- ately turn the heating off and the web dashboard will show an appropriate warning mes- sage. The Tank Sensor MUST be installed onto the special backplate supplied otherwise the safety switch will not operate and the Tank Sensor will not work.
Tank Sensor - Delete Network OWL Pairing
You can delete the Tank Sensor to Network OWL pairing by pressing both the Standby and More H/W buttons together for a minimum of 10 seconds (count to 15). The 3 LEDs will start flashing indicating that it is in pairing mode.
Tank Sensor - Delete Relay Unit Pairing
You can delete the Tank Sensor to Relay Unit pairing by pressing all 3 buttons together for a minimum of 3 seconds (count to 5). The 3 LEDs will start scrolling indicating that it is in Relay Unit pairing mode (for up to 2 minutes). Refer to Relay Unit Installation Instructions for further information.
Tank Sensor Factory Reset
You can factory reset the Tank Sensor by pressing both the Comfort and Standby buttons together for a minimum of 20 seconds (count to 25). The 3 LEDs will start flashing indicat- ing that it is in Network OWL pairing mode.
© 2 Save Energy Limited 2014 19