Page 8 - OWL Intuition Manuals

– Live cable either side of meter is acceptable.
• The Sensor must be a loose fit onto the cable. A larger clamp is available for purchase
from www.theowl.com.
• Plug the Sensor into any of the 3 sockets on the Transmitter.
• The Transmitter should be hung on the wall in a free area as far from large metal
objects as possible.
STEP FIVE - Log in to your OWL Intuition account
If you are not already, please log in to your OWL Intuition account with your username and password at: https://www.owlintuition.com
• •
•
You should now have an Electricity widget within your web dashboard.
If you watch this new widget, you should see the live consumption value updating every 12 to 60 seconds.
Check the signal strength of the radio signal between your Transmitter and Network OWL:
8
© 2 Save Energy Limited 2014
•
• •
If the signal strength is only 1 or 2 bars, to reduce the chance of intermittent / inconsistent data reception it is suggested that you reposition the Network OWL so that it is physically closer to the Transmitter.
The Network OWL should ideally be hung on the wall in a free area as far from large metal objects as possible. Position the antenna in a vertical orientation. If necessary you can replace the Ethernet cable with a longer cable (up to 100