Page 3 - OWL Intuition Manuals
P. 3
Installation Instructions
STEP ONE - Install Network OWL
• If you are adding electricity monitoring to an existing Intuition installation then please jump to STEP THREE - Log in and follow Wizard.
• If this is a new Intuition installation then you will first need to install the Network OWL (supplied separately). For full details please refer to the Network OWL installation guide supplied with that product, however a summary of the steps are listed below:
1. Connect Ethernet cable between spare active LAN port on your broadband Inter-
net router and the Network OWL.
2. Plug the power supply into the mains and insert the DC jack connector into the
base of the Network OWL.
3. Wait until the green LED on the top of the Network OWL is flashing with a “triple
blip” pattern. This should not normally take longer than 2 minutes.
4. Do NOT proceed to STEP TWO until this flashing pattern is observed.
STEP TWO - Create Intuition online account
• If you are adding electricity monitoring to an existing Intuition installation then please jump to STEP THREE - Log in and follow Wizard.
• If this is a new Intuition installation then you will first need to create a new OWL
© 2 Save Energy Limited 2014 3
