Page 10 - OWL Intuition Manuals

Useful Information
Network OWL Factory Reset:
You can Factory Reset the Network OWL by pressing the reset button (see diagram on page 3) while the power is on. With the Network OWL powered up, carefully insert a paperclip into the small hole and hold the button pressed in for a minimum of 10 seconds and then release. The green LED will flash rapidly. After about 30 seconds the blue LED will start a steady flash. After a Factory Reset you must work through this guide again but when following STEP TWO tick “Account Exists” to reuse your original account and password.
Network OWL Ethernet port LEDs:
These LEDs have the following meanings: Green – link ok / up; Yellow – data activity.
Customers with Existing OWL Electricity Transmitters:
If you already have an Intuition compatible OWL Electricity Transmitter (working with an OWL Energy Display) then you can also pair the Transmitter to the Network OWL using the Wizard (access via web dashboard top menu bar). The following Transmitters are sup- ported - CMR180, CMR160R, CMR160, CMR119.
10 © 2 Save Energy Limited 2014