Page 7 - OWL Intuition Manuals

b. Heating (OWL Intuition-c)
The Room Sensor replaces your exist- ing room thermostat and is typically installed in your lounge or hall. It is wirelessly paired with the Network OWL Gateway device. The Room Sensor provides simple day to day control for the heating. You can activate heat-
ing Boost, switch between Comfort, Standby or Away modes by pressing the Room Sensor buttons.
i. Room Sensor [RBT-3C]
Battery powered so it does not need mains power wiring to be installed. This version requires wiring back to the boiler / wiring centre.
The Room Sensor has a simple 3 but-
ton user interface, with Comfort (+),
Standby and Away buttons.
Fitted with a highly accurate digital temperature sensor, a low power latching relay (wired heating on/off control) and a radio connected micro computer running OWL’s latest advanced over air upgradable heating control software.
ii. Room Sensor [RBH-3C]
Identical to Room Sensor [RBT-3C] but also has accurate digital humidity sensor.
c. Hot Water (OWL Intuition-h)
The Tank Sensor is wired in series with your existing hot water tank thermo- stat. The Tank Sensor itself is typically installed adjacent to your hot water tank / cylinder, maybe on your landing if the tank is in your airing cupboard. It is wirelessly paired with the Network OWL Gateway device.
The Tank Sensor provides simple day to day control for your hot water and also your heating. You can activate the More Hot Water function by pressing the More H/W button. Additionally you can activate heating Boost or switch between heating Comfort and Standby.
i. Tank Sensor [TBTE3H]
Tank Sensor
Room Sensor
Battery powered so it does not need
mains power wiring to be installed. This
version requires wiring back to the boiler / wiring centre. The Tank Sensor has a cable connected (3m) accurate digital Temperature Sensor which is fitted to the side of the hot water tank / cylinder.
The Tank Sensor has a simple 3 button user interface, with Comfort (+), Standby and
© 2 Save Energy Limited 2014 7